1652H311 Ed.03
12
Keypad
Indicators
Pressing it for 3 seconds activates/deactivates Stand-By mode. In this mode, regulation is paused and the
m
icon is displayed.
In the programming menu, this exits the parameter without saving changes, returns to previous level or
exits programming.
Pressing once displays the temperature of probe S2 for 2 seconds (If it is enabled).
Pressing it for 3 seconds starts/stops the defrost.
In the programming menu, this allows scrolling around the different levels, or, during the setting of a
parameter, changing its value.
Pressing it for 3 seconds activates/deactivates continuous cycle mode.
In the programming menu, this allows scrolling around the different levels, or, during the setting of a
parameter, changing its value.
Pressing once activates/deactivates the cold room light.
Pressing it for 3 seconds accesses the condensed programming menu.
Pressing it for 6 seconds accesses the expanded programming menu.
In the programming menu, this accesses the level shown on the display or, during the setting of a
parameter, accepts the new value.
Pressing once displays the current effective value of the Set Point, taking into consideration temporary
modifications by other parameters (
C10
ó
C12
).
When an alarm is underway, pressing once mutes the acoustic alarm.
Pressing for 3 seconds accesses the Set Point setting.
Fixed:
Stand-By Mode activated. Regulation is
paused.
Flashing:
Controlled shutdown process for the
regulation underway.
Fixed:
Cold room door open.
Flashing:
The door has been open for a greater
time than has been defined in parameter
A12
.
There is an active alarm, but not an active HACCP
alarm.
Fixed:
HACCP alarm active.
Flashing:
HACCP alarm registered and
unconfirmed. Press the
key to confirm an
HACCP alarm.
Fixed:
Evaporator fans active.
Flashing:
The evaporator fans should be active
but a delay is preventing this.
Fixed:
The cold solenoid is active.
Flashing:
The solenoid should be active but a
delay or protection is preventing this.
Fixed:
Compressor active.
Flashing:
The compressor should be active but a
delay or protection is preventing this.
Defrost relay active.
Continuous cycle mode active.
Cold room light active.
Alarm underway muted.
Temperature displayed in ° Fahrenheit /
° Centigrade.
Programming mode active.
Fixed:
CAMM module in operation.
Flashing:
Malfunction in CAMM module.
Bluetooth activated (CAMM module only).
Содержание 16520
Страница 47: ...1652H311 Ed 03 47...