akira CT-25TW9AN, Руководство по обслуживанию

Страница: 23 / 32

23
Model No: CT-25TW9A
N
Version 1.0
e. Horizontal Center and EW adjustment (KEY 1)
i. Received 50HZ monoscope PATTERN. Set TV standard status. Adjust
5HSH to obtain horizontal center at the center of CRT screen.
ii. Receive 50HZ cross hatch pattern. Set TV standard status. Adjust 5EWW,
5PWW, 5UCR, 5LCR, 5PAR, 5BOW, 5EWT to obtain picture’s Horizontal
redisplay ratio more than 90% in factory mode.
Horizontal parallelogram 50Hz
5PAR
Horizontal bow 50Hz 5BOW
Horizontal shift 50Hz 5HSH
EW width 50Hz 5EWW
EW parabola /width 50Hz 5EWP
EW upper corner parabola 50Hz 5UCR
EW lower corner parabola 50Hz 5LCR
EW trapezium 50Hz 5EWT
iii. Receive 60HZ monoscope PATTERN. Set TV standard status. Adjust
6HSH to obtain horizontal center at the center of CRT screen.
iv. Receive 60HZ cross hatch pattern. Set TV standard status. Adjust 6EWW,
6PWW, 6URC, 6LCR, 6BOW, 6EWT to obtain picture’s Horizontal
redisplay ratio more than 90% in factory mode.
Horizontal parallelogram 60Hz 6PAR
Horizontal bow 60Hz 6BOW
Horizontal shift 60Hz 6HSH
EW width 60Hz 6EWW
EW parabola/ width 60Hz 6EWP
EW upper corner parabola 60Hz 6UCR
EW lower corner parabola 60Hz 6LCR
EW trapezium 60Hz 6EWT
f. OSD position adjustment.
i. Menu OSD position adjustment. Received 50/60Hz cross hatch pattern. Set
TV standard status. Press KEY 2 in factory mode, adjust 5VOF /6VOF and
HOF item, to obtain menu OSD at the center of CRT screen.
ii. LOGO position adjustment. Receive 50/60Hz cross hatch pattern. Set TV
standard status. Press KEY 7 in factory mode, adjust XMIN, XMAX,
YMIN, and YMAX item, to obtain LAGO at the center up to 1/3 of CRT
screen.
iii. TELETEXT OSD position adjust. Received 50/60HZ TELETEXT signal.
Set TV standard status. Press KEY 7 in factory in factory mode, adjust
TXMI and 5TYM/6TYM item, to obtain INDEX at the center of CRT
screen.
g. White Balance adjust (Applied in factory) (KEY 3)
i. Normally, 5P60 can auto adjust white balance, but for some CRT need to
adjust white balance carefully by hand. Set BRIGHTNESS and
CONTRAST at normal status, receive GREY SCAL and entering factory
mode press KEY 3, set WPR at 31, adjust WPG and WPR to obtain white
balance.