akira CT-14DX9, Руководство по обслуживанию

Страница: 9 / 12

Model No: CT-14DX9A_14DX9N_14DX9R_14DX9CP_14DX9R(G)_14DX9(IKD)
Version 1.0
9
2. Direct Enter:
2.1. Use Factory mode Remote control unit, press the “factory” key to enter into “factory mode”
function. Press one more time “factory” key to enter “White balance” adjustment condition,
press one more time to enter the adjustment condition. Press One “factory” key to setting up
our requirement spec. Last press once “factory” key to leave factory mode function.
Use “factory mode” for TV ageing, 2
nd
step is to align the White Balance in good condition. 3
rd
step
adjust the required electrical specification. (The function adjustment are 20 selection) Others function
of adjustment are 39 items, and you can use “P+/P-“ key and “V+/V-“ key for selection and
adjustment.
1. Setting of company logo:
1.1. Switch on the TV set and set the TV in AV mode, Press Remote control “DISP” key and the
TV screen will display “AV” and follow by presetting the Numeric key “6”, “4”, “8”, “3” to
enter the company logo setting.
1.2. Press the “P+/P-“ key for selection of function and press “V+/V-“ key for adjustment. Press
“>*<-“ key to change or select your requirement.
1.3. Logo setting 1
st
row that come with 4 kinds of setting:
1.4. Logo setting 2
nd
row that come with 2 kinds of setting:
1
st
turn off the display, 2
nd
turn on the display (display the word setting of maximum 10
words).
1.5. When the 2 rows of words are display on the TV screen, and you can check the words
positioning. Not too lose to each other or the words are not clear to display on the screen. Re-
set the logo words from the logo setting factory mode.