akira 14LA/ANZ, Руководство по обслуживанию

Страница: 43 / 61

-
43
-
Model No.: 14LAANZACDC
Version: 1.0
Page 2 (MENU 1)
FORCE 60HZ 0 Force 60Hz (0: no /1: yes): when select int. signal
CROSS B/W 0 INT. signal set (0: normal /1: dark/2: white/3: crose)
R-Y /B-Y G.BL 8 Corresponding to R-Y /B-Y GAIN BALANCE option of decoding
chip (range: 0~15), normally “8” is selected
R-Y /B-Y ANG 8 Corresponding to R-Y /B-Y ANGLE option of decoding chip
(range: 0~15), normally “8” is selected
B-Y DC LEVEL 8
R-Y DC LEVEL 8
SECAM B-Y DC 8 Corresponding to the SECAM B-Y DC option of LA76818 (range:
0~15), normally “8” is selected.
SECAM R-Y DC 8 Corresponding to SECAM R-Y DC option of LA76818 (range:
0~15), normally “8” is selected.
YUV B-Y DC 8 “B-Y DC” setting for YUV (range: 0~15), available only if
LA76818 is used
YUV R-Y DC 8 “R-Y DC” setting for YUV (range: 0~15), available only if
LA76818 is used
Page 3 (MENU 2)
RF. AGC 25 RF. AGC adjustment (range: 0~63)
VOLUME OUT 40 Internal volume output (range: 0~127); only when stereo function is
selected can it
ZOOM SIZE 80 Vertical size during picture zoom (range: 0~127)
WIDE SIZE 50 Vertical size during wide screen (range: 0~127)
H. BLK. LEFT 4 Left blanking adjustment (range: 0~7)
H.BLK.RIGHT 4 Right blanking adjustment (range: 0~7)
OSD H. POSI 30 OSD left right position (range: 0~63)
OSD V. POSI 20 OSD vertical position (range: 0~31)
SCR. H. POSI 18 Adjust original position (left) (range: 0~127)
SETUP SELECT 0 Setted factory adjust mode: (0: can’t enter following adjust Menu/1:
can)