Akiles Cardmac Pro, Руководство по эксплуатации

Страница: 10 / 21

10
2) Press (+) or (-) to adjust pieces to be cut. ( For example, if you have preset mode “3.50 x 2.00 10 pieces”,
and you would like to make 100 business cards, press [Start ( + )] 10 times until it says 100 pcs, then insert
10 sheets into the feeding tray)
3) Press [Mode Changeover] key to return to the standby state.
Datum Selection – Selecting the method of Starting Point
1) Press [Set Parameter] key two times. Press [+] or [ -] to toggle between these two selections:
a. Datum selection: Frontal end: The fixed starting point is detected by the front edge of paper.
b. Datum selection ■
-
The fixed starting point is detected by a ■ mark on the paper.
Black Mark Datum Selection Details:
i. To properly use the Black Mark Datum Selection feature, make sure your printed black
mark follows the requirements below:
a) Atleast 50mm (2” wide) and 3mm (0.12” height) black mark.
b) A minimum of 3mm and maximum of 20mm from frontal edge of paper to front edge of
black mark.
c) Black mark should be centered on your page.
d) First Cut line (dotted line is cut line) is 5mm from front/top edge of black mark
e) See below picture of exact detail.
f) A minimum 60mm from first cut of the last row to the back edge of paper.
2) Select via [+] or [-] keys.
3) Press the [Mode changeover] key to return to the standby state
Selecting the Language
1) When the [Set Parameter] key is pressed three times, the LCD panel will show:
OR
OR
2”
3.5”