!
INSTRUCTIONS FOR CRANE OPERATORS
These instructions have to be followed. Marked
1.
Check that the radiotransmitter operates on the crane which
you are going to drive (ex. give a signal). Check the
function of the radiotransmitter.
2.
Check that no unauthorized person is on or at the crane
when you start to drive it. The blocking device at entry of
the crane should be closed.
3.
Check the position of the symbols for driving direction
(crane-trolley travel).
4.
At the beginning of each shift the crane operator is to test
brake, limit-switches and emergency stop function.
5.
The crane operator is when driving the crane to walk or
stand at a suitable distance from the crane hoist in order to
have adequate overview of the operation.
6.
It is prohibited to move the crane load over oneself or other
people. Signal in order to warn others.
7.
Avoid driving into end stops since equipment and goods
can be damaged.
8.
Check your own free passageway in order to avoid tripping
over material on the ground when you drive the crane Keep
the workplace in good order.
9.
If you loose control of the crane movements, release the
pushbuttons in order to stop the crane. If still it does not
stop, actuate the STOP function.
MANUAL BC7400 No. 926137-000
Version: A0 Approved by: TB
Page 7 (8)
10.
Find out where the crane's main power disconnector is in
order to be able to quickly switch off if required.
11.
Never hand over the transmitter to anybody who has not got
through training in radio-control crane operation.
12.
After completed operation you should always switch the
transmitter off with STOP. Note! Do never put the
transmitter aside without switching the transmitter off with
STOP.
13.
The main contactor of the crane is to be switched off after
end of working hours. The transmitter is then to be kept
inaccessible to unauthorized persons.
14.
In case of faults or breakdowns in the radiocontrol
equipment the crane should permit operating from the cab
or with suspended operating gear. In such case first turn the
switch from radio operation to manual operation. Make
certain how this switch-over is to be made before you start
driving any individual crane.
15.
At switching from manual operation to radio operation and
at switching on the main power disconnector, make sure
where all the radiotransmitters are.
16.
Make sure that the receiver can not be activated when you
service the transmitter.
ALWAYS REPORT DEFECTS AND DEFICIENCIES TO
THE WORK MANAGEMENT.
MANUAL BC7400 No. 926137-000
Version: A0 Approved by: TB
Page 8 (8)
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
FCC note:
The equipment user is required by the radio service rules to obtain a licence
before operating the equipment.