4. Input your Wi-Fi password and start Wi-Fi configuration.
5. Set the administrator password.
6. Please rename the device after Wi-Fi connect successfully
If you want to reconfigure your Wi-Fi network, please press reset button for 5 seconds
and follow the instructions again.
Sharing a User
1. Enter to monitor interface, click the share key and input administrator password.
2. Click the “+” and assign a nickname to the shared user, then the QR code will be
shown.
3. Other device can be viewed by scanning the QR code on ToSee APP, it allows up to
4 devices to use at the same time.
①
②
Access the Motion Detection Settings by going to the Device Dashboard clicking on
Motion Settings.
Select Motion Detection Sensitive, the default is 10 seconds.
②
5
6
V. MOTION DETECTION
①
②
①
②
