79
Input Source
The
Input Source
parameter defines whether you are going to record an external
audio signal (
External
) an internal signal from the software (
Resample
). A
Resample recording does not require an audio connection because the source is
within the software and is therefore recorded without any loss in audio quality. You
can, for example, use Resample to record two or more samples by hitting the corresponding pads
simultaneously.
Input Monitor
When input monitoring is on, the audio you hear in your headphones will be taken
before
it reaches the software, ensuring zero latency. When input monitoring is off,
the audio you hear in your headphones will be taken
after
it is processed in the
software, so there may be some latency, but you will hear the audio source as it
sounds in the recording.
Click the
Input Monitor
button to control the incoming audio source through your audio system.
Tip:
To avoid possible clicks or feedback when using input monitoring, reduce the level of the audio
sources.
Sample Length
For reference, the
Sample Length
display shows you the length of your sample
during the recording procedure.
Содержание MPC Essentials
Страница 1: ...User Guide English Manual Version 1 0 ...
Страница 148: ...akaiprompc com ...
