Akai MINIAK Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 60

background image

36

D. LFO Depth

This adjusts the magnitude of the LFO modulation. When set to 0%, the LFO has no effect on
the notch frequencies.
Range: 0 – 100%

E. LFO Shape

This selects between the two LFO shapes.
Range: sine wave, triangle wave

F. Tempo Sync

This selects whether the LFO rate is synchronized to the MINIAK's tempo. When "follow tempo"
is selected, the LFO Rate parameter is displayed as a multiple of the Tempo.
Range: fixed rate, follow tempo

40-band vocoder:

A vocoder uses two sets of band-pass filters (filter banks) to impart the

characteristics of one sound source onto another. The analysis filter bank determines the level of the
input at several different frequencies. These levels are used to modulate the output levels of the
corresponding frequencies of the synthesis filter bank. The most common use of this is to send a
synthesizer signal into the synthesis input and a voice (recorded or live via a microphone) into the
analysis input to get a "talking synthesizer" effect.

A. Analysis Gain

Also sometimes referred to as "Analysis Sensitivity," this adjusts the gain of the input to the
analysis filter bank.
Range: -100% - +100%

B. Sibilance Boost

This adjusts the level of a high-pass shelving filter at the input to the analysis filter bank. This will
increase or decrease the sibilant frequencies (consonant sounds) to improve intelligibility or
change the tonality of the vocoder.
Range: 0% - 100%

C. Decay

This adjusts how quickly the synthesis filters will react to the input signal. A faster response
(lower setting) will usually be more intelligible, but slower decay times (higher setting) can be
more musical.
Range: 0 - 100%

D. Band Shift

This shifts the frequencies of the Synthesis filter bank, relative to the analysis filters. The result is
a pseudo pitch-shift effect.
Range: -100% - +100%

E. Synthesis Input

This selects which signal is sent to the synthesis filter bank.
Range: Effects Send, Audio In Left, Audio In Stereo

F. Analysis Signal In

This selects which signal is sent to the analysis filter bank.
Range: Effects Send, Audio In Right, Audio In Stereo

G. Analysis Mix

This adjusts how much of the analysis signal is mixed into the output.
Range: 0 - 100%

«
...
36
37
38
39
40
...
»

Содержание MINIAK





























































Отзывы:

Нет отзывов

Похожие инструкции для MINIAK

Бренд: Waldorf Страницы: 11

Бренд: Atmel Страницы: 26

Бренд: Nordic Ware Страницы: 53

Бренд: Olitronik Circuits Страницы: 4

Бренд: Endorphin.es Страницы: 2

Soundhack tELHARMONIC

Бренд: Make Noise Страницы: 21

Бренд: teenage engineering Страницы: 6

CIRCADIAN RHYTHMS

Бренд: Tiptop Audio Страницы: 48

Бренд: Stagg Страницы: 56

Бренд: nord Страницы: 233

Бренд: mikroElektronika Страницы: 6

Бренд: neutral labs Страницы: 12

Бренд: NF Страницы: 204

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды