CD OR CD+G / MP3+G OPERATION
This unit is designed to play CDs/CD+G/MP3/MP3+G
disc bearing the identification logo respectively. If the
disc does not conform to the standard, it may not play
properly.
NOTE:
The unit may not be able to read CDR or CDRW disc correctly. The readability
depends on the quality of recording produced by CD recorder or CD writer.
LOADING A DISC
2.
3. Gently close the CD Door to the CD compartment. The Karaoke Machine begins to read
the disc and “READ” will be displayed. After that, the operation icon will appear on the top
of the TFT screen.
4. Press
PLAY/PAUSE
to play the disc. (If no disc is loaded, it will display “NO DISC”)
STOP
If the
STOP
button is pressed in the course of playing, the disc will cease to play.
SKIP PLAY (For both CD and CD+G/MP3+G discs)
In stop or playback mode, you can skip up or down to a specific track by
pressing the forward or back SKIP Button.
PLAY/PAUSE
1. To start playing, press the
PLAY/PAUSE
button once, the currently track number and
PLAY indicator will appear on the screen.
2. To temporarily stop playing, press the
PLAY/PAUSE
button, the PAUSE indicator will be
shown on the screen.
3. To resume play, press the
PLAY/PAUSE
button again, the PLAY indicator will be shown on
the screen.
NOTE: -
Pressing pause when a CD+G/MP3+G is playing may cause distorted lyrics
on the screen, any distortion will remain until the whole screen is
refreshed during an instrumental break or you stop the song and start it
from the beginning
- Never place anything except a compact disc on the disc compartment.
Foreign objects can damage the unit.
- Do not apply excessive force to disc cover.
- Only place one disc on the disc compartment at a time.
- Do not open the disc cover of the CD compartment while it’s playing.
EN - 11
TURNING POWER ON/OFF
1. To turn on the
Karaoke Machine
, switch the POWER button at the
back to ON. Press the STANDBY button once, the POWER
indicator will light up to full brightness and TFT screen will display
the OPENING SCREEN and start to read CD. (If no disc is loaded,
it will display “NO DISC”)
2. To turn off the system, press the
STANDBY
button again. The power indicator and
TFT screen will turn off. Switch the POWER button at the back to OFF to cut off the
power.
Open the CD door, place a disc in the CD compartment with the printed side facing down.
1. Press FUNCTION button to toggle to CDG mode.