MAKING THE CONNECTIONS
EN - 10
SETTING UP LINE IN CONNECTION
The Line-in mode allows you to connect external music player or external sound source to
your Karaoke Machine speakers
SETTING UP YOUR MICROPHONE
SETTING UP YOUR GUITAR OR KEYBOARD
1. Plug an external input device (not included), e.g. guitar or keyboard, into the external
input jack.
2. Turn on your external input device, if necessary.
3. Turn on the
Karaoke machine
.
4. Adjust the
Master Volume
and
External Input Volume
to a comfortable level.
5. Start your solo performance with your guitar or keyboard OR jam music from Karaoke
machine.
1. Plug a microphone into the
MIC1
or
MIC 2
jack at the front of your Karaoke Machine.
Their output is mixed with playback from
CD/ CD+G
2. Located on the microphone, there is an
ON/OFF switch.
3. Ensure you set the ON/OFF switch on the
microphone to ON when required for use.
Warning:
Please do not point the microphone head directly to the front of the speaker(s) on the unit
when you are singing, it would cause unwanted feedback sound that may affect the
performance of your unit.
Tapping or dropping the microphone while it is on can permanently damage your
microphone. Resist the urge to swing the microphone around by the cord!
2. Plug a 3.5mm audio cable (not included)
into your external music player and connect
the other end (3.5mm jack) into the
LINE IN
jack on the front of your Karaoke Machine.
3. Make sure your external music player is turned on.
4. Start music playback on your external music player.
5. Adjust MASTER VOLUME to control the sound level of music playback from the speakers
on the Karaoke machine.
VHF wireless microphones are not recommended to work with this Karaoke system. Some
VHF wireless microphones may cause unwanted noise and interference.
1. To turn on the
Karaoke Machine
, switch the
POWER button at the back to ON. Press the
STANDBY button once, the POWER
indicator will light up to full brightness and
TFT screen will display the OPENING
SCREEN.
Press FUNCTION button to toggle
to LINE IN mode.