Akai ICE104S, Руководство пользователя

Страница: 25 / 32

6
Section
2
.
Safety Advice
·
Please read this booklet thoroughly before installing and switching on the
appliance
.
The manufacturer accepts no responsibility for incorrect installation
and usage
.
·
Your old appliances contain insulation gases and refrigerant that must be
disposed of correctly
.
Please ensure that the refrigerant circuit is not damaged
before the appliance is taken away for correct disposal in line with current
legislation
.
If there is any doubt contact your Local Authority for instructions
.
·
This appliance is a natural gas with a high level of environmental compatibility
;
isobutene is a flammable gas
.
damaged during transportation
appliance
.
In the event that the refrigerant circuit is
which the appliance is situated
.
·
If using an adaptor
,
this must be used in accordance with the manufacturers
instructions and ensure that the electrical circuit is not overloaded as this could
cause overheating
.
·
Do not twist or bend the cables
,
and keep them away from hot surfaces
.
·
Do not plug ı n or unplug this appliance with wet hands.
·
Following installation make sure that the power cable is not trapped underneath
the appliance
.
·
Ensure the appliance is left in an upright position for at least 4 hours before you
switch it on
.
The appliance has to be unplugged after use and before carrying out user
maintenance on the appliance.
·
however
,
caution is required as
It is essential to ensure that refrigerant tubes are not
and the installation of the
damaged
,
avoid naked flames or sources of ignition and ventilate the room in