Akai Ewi4000s, Руководство оператора

Страница: 48 / 62

EWI4000s Operator’s Manual rev 1.0
40
Chapter4: Using the EWI4000s as a MIDI Controller
Changing the Breath Sensor output
It allows you to change the Breath Sensor output to transmit some MIDI Control Change
information. You can select several MIDI Control Changes at the same time.
1. Press the [SETUP] button.
While pressing the [SETUP] button, “Ad” is shown on the
program/Data display.
2. While pressing the [SETUP] button, select
“bS” (Breath Sensor) by pressing the
[HOLD] button.
It allows you to select the setup pa-
rameter by pressing the [HOLD] or the [OCT] button
while pressing the [SETUP] button.
3. After selecting “bS”, release the [SETUP] button.
The currently selected Breath Sensor setting will be shown on the Program/Data display.
The selectable MIDI events in this field are as follows:
“vo” : Volume (07) “EP” : Expression (11)
“AF” : Aftertouch “br” : Breath control (02)
“vE” : Velocity data
4. Select the MIDI event you wish by using the [HOLD] button or the [OCT]
button, and then press the [TRANS] button.
By pressing the [TRANS] button, you can select whether its MIDI event will be
transmitted or not. If you choose to transmit the MIDI
event, the “dot” LED in the Program/Data display will
light up.