Akai Ewi4000s, Руководство оператора

Страница: 13 / 62

EWI4000s Operator’s Manual rev 1.0
5
C: Bend Plate part
(1) Neck strap Mount
Hang the EWI4000s on a Neck strap (included) to
make your playing easier.
(2) Program key (with a touch sensor)
It changes the Program (internal sound). By touch-
ing this key without touching any note keys, the se-
lected Program number is shown on the Program/
Data display, and then you can change the Program
number by using the [HOLD] or the [OCT] button.
(3) Bend Up Plate (with a touch sensor)
Touching this key raises the pitch. You can adjust
the position of the plate by loosening its screw.
(4) Bend Down Plate (with a touch sensor)
Touching this key lower the pitch. You can adjust
the position of the plate by loosening its screw.
(5) Earth Plate for right hand (with a touch sensor)
Always keep either your thumb on the Earth plate while playing
(6) FX (Effect) button
Pressing this button shows the overall Reverb level on the Program/Data display, and
then you can change the level by using the [HOLD] or the [OCT] button.
(7) LEVEL button
Pressing this button shows the Main Output level on the Program/Data display, and
then you can change the level by using the [HOLD] or the [OCT] button
(8) Touch Sensor Sensitivity Adjustment knob
Adjustment knob for Touch sensor keys. It is very important to set this correctly. See
page 18 to set this up properly.