
74
Chapter 7: Advanced technique for mixing
4. Press the
SOURCE
[F3] key in Assign mode and assign
DIGITL L
and
DIGITAL R
to Tracks 1 and 2
respectively.
Input signals from the OPTICAL IN jacks will be assigned to physical tracks 1 and 2.
5. Set Tracks 1 and 2 to record waiting mode, and start recording.
Using the Solo function
The mixer section of the DPS12 provides a Solo function that allows specified channels to be routed to Master L/
R. This function is useful when you wish to monitor only certain input signals or tracks. The Solo function is
available whenever the transport operations on the DPS12 are available (that is, in Main mode, Track View mode,
Mixer mode, and when the Control Panel is displayed).
1. Press the [SOLO] key to use the Solo function.
The
[SOLO]
key LED flashes and the Solo function is enabled.
➸
NOTE :
If you press the
[SOLO]
key in Main mode, Track View mode, or when the Control Panel is
displayed, the function indication for the
[F1]
and
[F2]
keys will change from
TRACK
and
INPUT
to
TRACK
and
THRU
, as seen in Mixer mode. This means that you can use the
[F1]
and
[F2]
keys to toggle
between TRACK MIX channels and THRU MIX channels. A symbol
appears along with the function
indication for the currently-selected channels.
• When TRACK MIX channels are selected
• When THRU MIX channels are selected
2. Press the
TRACK
[F1] key to solo a TRACK MIX channel, or press the
THRU
[F2] key to solo a THRU
MIX channel.
3. Use the [RECORD SELECT] keys to select an individual channel to monitor.
Use a corresponding
[RECORD SELECT]
key to select a channel. Each
[RECORD SELECT]
key corresponds
to a channel, as follows:
Содержание DPS12
Страница 12: ......