Akai DPS12 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 156

Akai DPS12 Скачать руководство пользователя страница 3

i

WARNING

WARNING

The DPS12 is designed to be used in a standard household environment.

Power requirements for electrical equipment vary from area to area. Please ensure that your DPS12 meets
the power requirements in your area. If in doubt, consult a qualified electrician or Akai Professional dealer.

120 VAC

@ 60 Hz for USA and Canada

220~240 VAC

@ 50 Hz for Europe

PROTECTING YOURSELF AND THE DPS12

•

Never touch the AC plug with wet hands.

•

Always disconnect the DPS12 from the power supply by pulling on the plug, not the cord.

•

Allow only an Akai Professional dealer or qualified professional engineer to repair or reassemble the DPS12.
Apart from voiding the warranty, unauthorized engineers might touch live internal parts and receive a serious
electrical shock.

•

Do not put, or allow anyone to put any object, especially metal objects, into the DPS12.

•

Use only a household AC power supply. Never use a DC power supply.

•

If water or any other liquid is spilled into or onto the DPS12, disconnect the power, and call your dealer.

•

Make sure that the unit is well-ventilated, and away from direct sunlight.

•

To avoid damage to internal circuitry, as well as the external finish, keep the DPS12 away from sources of
direct heat (stoves, radiators, etc.).

•

Avoid using aerosol insecticides, etc. near the DPS12. They may damage the surface, and may ignite.

•

Do not use denaturated alcohol, thinner or similar chemicals to clean the DPS12. They will damage the
finish.

•

Modification of this equipment is dangerous, and can result in the functions of the DPS12 being impaired.
Never attempt to modify the equipment in any way.

•

Make sure that the DPS12 is always well-supported when in use (either in a specially-designed equipment
rack, or a firm level surface).

•

In order to assure optimum performance of your DPS12, select the setup location carefully, and make sure
the equipment is used properly. Avoid setting up the DPS12 in the following locations:

1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment

«
1
2
3
4
5
...
»

Содержание DPS12





























































































































































Отзывы:

Нет отзывов