MENUS OPERATION (continued)
Tune Menu
(continued)
2. SKIP
After Auto Search, there may be some repeated program
or
inferior
signals received. Skipping the undesired program position
can
dra-
matically quicken channel selection.
After selecting "Skip"
in
the TUNE menu, press the VOL-/VOL+ but-
tons to set "Skip On". When the TUNE menu has disappeared, press
the
CH-/CH+
buttons and you will find the channel number skipped. If
you select the channel number by the Direct Select buttons, the
channel number has changed from green to yellow.
To
resume the channel number that has been skipped, repeat the operations mentioned above. Then
set "Skip Off".
3. Search
In case the desired channel cannot be preset with the Auto Program
function, or you would like to set the desired channels to specific
channel numbers, please use the Search function.
After selecting "Search" in the TUNE menu, press the VOL-/VOL+
buttons. The TV searches another lower/upper channel. To stop
search, press the MENU button.
If the selected channel is not the one you want, press the buttons a-
gain until the desired channel is selected. If the TV dose not stop searching when finding a channel,
please use the Fine Tune function.
4. Frequency fine-tuning
After selecting "Fine Tune" in the TUNE menu, press and hold down the VOL- or
VOL+
button until
you
get the best sound and picture effect.
Press the DISP button to check up the fine-tuned channel, and you will find that
the
position number
turns to red.
5. Auto Search
After selecting " Auto Search " in the TUNE menu, press the VOL+
button. The
TV
will search automatically in sequence. After auto
search, the TV will store receivable channels and returns to POS1.
Unused position number is automatically set to Skip On. During auto
Search, press the MENU button to stop searching.
Swap Menu
Use the SWAP function to resort program position. For
example,
you
want to change Channel 9 to Channel 1
.
1. Press the MENU button repeatedly or the green button directly (in
the
TV
mode) to select the SWAP menu.
2. Press the CH-/CH+ buttons to highlight "Channel A". Press the
Numeric buttons to set it to 9. Then set channel B to
1
in the way
mentioned
above.
8
TUNE
Color
Sound
Skip
Channel
Search
Fine Tune
Auto Search
D/K
Off
2
Auto
Search
VHFL
VOL+: Up
MENU: Stop
Auto Search
VHFL
MENU: Stop
SWAP
Channel A
1
Channel B
3
Swap
