the chip inside may get into a dead cycle state and cannot respond
to external command.
1. When the radio has no key response without lock sign of "
"
displayed on the screen, or there is no display at all on the
screen, the radio may be at dead state. In this case, you can
push the Reset key with pen point or similar object to reset the
radio.
2. When the radio has normal reception but all other keys except
power switch, light switch and up/ down search key, the radio
may also be at dead state and you need to reset the radio for
normal use.
Tips:
- When you press the reset key, all saved date in the memory will
be lost. You have to save stations, adjust time, set time power-on
time, etc, again.
- Do not press Reset key when it is not necessary!
USING NIGHT LIGHT
For your convenience of using the radio at night or in dark places,
AD-TS06 is equipped with special night light. When you need it, you
can press Ligth key. The light at the bottom of the screen and
keyboard backlight will turn on for 8 seconds.
If you make other key operation within the 8 seconds,
keyboard backlight will keep on until 8 seconds passes
after the last key operation.
Tip: Do not use the light for a long time, as it uses battery power very
quickly!
Note: When you use the light for a long time, battery power will be used
up very quickly. In case of low battery, the light will be very dim but
the radio can still work normally. In this case, you would better replace
batteries in time to avoid losing saved date in the memory.
15
