4. Inputting SW21.40MHz
a)Select SW2 by short pressing Band after
turning on the radio.
b)Press Input/ Lock key for display as shown
in the pictures on the left.
c) Input 2.1.4.0 with number keys, press Input/ Lock key again
after inputting the frequency and you can receive the station
of SW21.40MHz.
Tip: At short wave state, as the unit has adopted advancing step length
of 0.005MHz, so far as you input the third digit after decimal, the unit
will automatically correct it to 5. On completion of correct input of short
wave frequency, the unit will automatically adjust the input digits and
display decimal form. In case input frequency is beyond the frequency
range of the band (or an inkling input is judged to be beyond the
frequency range) when you input a station frequency, there will be
"Err" (error) displayed on the screen and the frequency input will be
ineffective. In this case, please make sure of the band in which you
desired station belongs and then try it again.
METER BAND INDICATION AND CONVERSION
As SW stations are mainly concentrated within and near meter band
range, for convenient reception, the unit has a special Meter Band
key that can make conversion within the range of meter bands of
SW1 and SW2 that are constantly used. There are altogether 12
meter bands in the unit, 5 meter bands in the range of SW1 and 7
meter bands in the range of SW2. After turning on the radio, at the
state of SW1 or SW2, you can convert and select meter band with
repeated short presses on the key and the selected meter band
frequency will be the starting frequency of the meter band. You can
select your desired station by searching forward or backward manually
or automatically.
Note: If press the key at FM or MW, the unit will get into SW1.
10
FM 1 2
MW
SW
1
2
SNOOZE
MHz KHz
MHz
M E M O
BASS
FM 1 2
MW
SW
1
2
SNOOZE
MHz KHz
MHz
M E M O
BASS
FM 1 2
MW
SW
1
2
SNOOZE
MHz KHz
MHz
M E M O
BASS
