ENGLISH
Preparation for Use
Operation with AC power
Operation with batteries
o
o
o
o
o
o
To wall socket
AC 230 V
To AC INPUT
1
4
3
2
5
7
8
6
Connect the AC power lead to the AC power input socket, then connect the AC power lead
plug to the wall socket.
Replace the batteries when they become weak and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
Corrosion, oxidation, battery-leakage and any other gradually acidic defect of this nature will
invalidate the guarantee.
If the unit will not be used for a long period of time, remove the AC power lead from the wall
socket.
Connection of the AC power lead to the unit disconnects the batteries.
Never use a power lead other than the one supplied. It may cause an electric shock or Þre.
Notes:
Insert the batteries according to the direction indicated on the rear panel.
When inserting or removing the batteries, push them towards the battery terminals.
Installing the batteries incorrectly may cause the unit to malfunction.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not be used for long periods of time. This
will prevent potential damage due to battery leakage.
Batteries are not included.
1 Disconnect the AC power lead, and remove the battery com-partment cover.
2 Insert 8 "D", size batteries into the battery compartment.
3 Replace the battery compartment cover.
Battery replacement:
Notes:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Caution:
/
/
/
PAUSE
STOP/EJECT
F.FWD
REWIND
PLAY
RECORD
TAPE
56
PAUSE
STOP/EJECT
F.FWD
REWIND
PLAY
RECORD
