ENGLISH
Enhancing your system
Recording from CD/USB
Headphone
Programmed track recording from CD/USB
o
o
o
o
o
o
/
/
/
PAUSE
STOP/EJECT
F.FWD
REWIND
PLAY
RECORD
TAPE
Cassette play and record buttons will automatically release when the end of tape has been
reached.
Before plugging in or unplugging the headphones, make sure the volume level is reduced.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance is 32 ohms.
When headphones are connected, the speakers are disconnected automatically. Adjust the
VOLUME control for desired volume.
1
Set the FUNCTION switch to CD or USB.
2
Load a blank cassette into the cassette compartment with
the side to be recorded on facing up.
3
Press the RECORD button, the recording will begin.
4
When press the STOP/EJECT / button during recording,
display will appear, but CD still spinning.
5
To stop the CD spinning press the button.
1
Select the memories track you want to record.
2
After memories the selected track, press the RECORD
button. The recording for memory track will begin until
end.
3
After recording is completed, disc will stop to rotate, but
tape still rotating.
4
Press the STOP/EJECT / button to stop recording.
Advanced Feature
Note:
72
PAUSE
STOP/EJECT
F.FWD
REWIND
PLAY
RECORD
