After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
24
Other Useful Information (Cont.)
Drain pump maintenance
We recommend that you clean the drain pump filter regularly (at least once a month) to
avoid blockages created by bobby pins, coins and excess lint.
Proceed as follows:
1. Disconnect the washer from the power source.
2. If necessary, wait until the water has cooled down.
3. Place a container underneath the pump opening to collect any spillage (see
below, left).
4. Turn the filter cap anticlockwise to take it out gently (see below, right). Always
keep a rag nearby to dry up water spillage when removing the pump filter.
5. To remove any objects from the filter, wash it thoroughly in a basin or under
running water (see below, left).
6. Put the cap back and place the filter back in its seat (see below, right).
Filter
NOTE:
The drain pump is located at the rear of the machine as illustrated on page 9.
