with the power supply unit provided
with the machine, it must only be
supplied at safety extra-low voltage
corresponding to the marking on
the machine.
z
If the supply cord is damaged, it
must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
z
This machine can be used in the
car. Do not operate the machine
while driving.
z
Never touch the heating disc and
steam vent of machine when and
immediately after this machine is
used for making and heating the
coffee.
z
Special care needs to be taken to
prevent children from touching the
machine (for fear of scalding).
z
The air vent water lid must be
installed well when the machine is
being used for making and heating
the coffee.
z
The water in the water cavity, if
excessive, may overflow (for fear of
scalding).
z
Never shake the machine body
during use. General safety
instructions, the machine may
topple and fall (for fear of scalding).
z
The filled water must not be over
the MAX (maximum) water level
line marked inside of the water
cavity of the machine. The water
may overflow.
z
Use the rated 7A/100-240V power
socket separately. When this
machine shares the same
multi-purpose socket with other
electric machines, abnormal heating
may occur (risk of ignition and fire).
If the multi-purpose socket is used,
its rated current needs to be above
7A, and it needs to be used
separately.
z
Insert the power plug into the socket
to the end (risk of ignition and fire
caused by electric shock and short
circuit).
z
Remove the dust on the power plug
periodically. Bad contact caused
by moisture and other reasons
(risk of ignition and fire caused by
bad contact). Wipe the power
plug with a dry doth.
z
Never unplug the power plug with
wet hands (risk of electric shock).
z
Never destroy the power cable
or power plug. Without permission,
never machine, damage,
excessively bend, forcefully pull
or twist the power cable or power
plug, place the power cable or
power plug near a heating object
or under heavy load, or squeeze
the power cable or power plug
(potential risk of ignition and fire
caused by electric shock and short
circuit).
z
If the power cable or power plug
is damaged, or still loose after they
are inserted into the socket, never
use the machine (risk of ignition
and fire caused by electric shock
and short circuit).
z
Never disassemble or damage the
battery (potential risk of ignition and
fire caused by short circuit of battery).
z
Never place the battery on a
WARNING!
CONDITION OF POWER CABLE,
POWER PLUG, AND BATTERY
flame
(maximum temperature rise 30k)
(potential risk of ignition and fire
caused by a battery).
