长：105mm 宽：148mm
比例：1:1
ACP100
3
长：105mm 宽：148mm
比例：1:1
ACP100
9
6.Troubleshooting
No sound
Not
operating
properly
The volume is set too low.
The headphone is not securely
inserted into the product.
The CD is paused or stopped.
The battery power is low.
The batteries are incorrectly
installed in the Battery
Compartment.
Condensation has formed on the
internal parts of the Laser Pickup,
which may occur when the product
is moved to a location with a
different temperature or humidity
level.
Increase the volume using
the Volume Dial.
Ensure the headphone is
securely inserted.
Resume play of the CD.
Replace the batteries as
instructed by the “Battery
Installation” subsection.
Verify that the battery
polarities are correct in the
Battery Compartment and
adjust if necessary.
Wait 2 hours before
operating the product to allow
the internal parts to adjust to
the surrounding temperature.
Decrease the volume using
the Volume Dial.
Skip to another track or
replace the CD.
Clean the Lens per the “Care
and Maintenance” section.
Distorted
sound
The volume level is too high.
The CD is distorted.
There is dust/dirt on the Pickup
Lens or the CD.
PROBLEM
PROBABLE CAUSE
RESOLUTION
