5
6
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when
traffic program identification code has been received.
When TA is ON, traffic program identification code is not received during specified time.
(2) When pressed long, it is selected EONTA LOCAL/EONTA DISTANCE mode.
The purpose of this key is to reduce unwanted EON TA switching, which EON TA Information was
received from current station and the radio switched to that EON linked station, but no information
could not be received because the EON linked station is located too far from that area. So the radio
is switched back to current station again. In above operation, a customer listen to a wrong program
or mute sound for a while.
1) EONTA LOCAL mode:
When the filed strength level of EON linked is less than the threshold level, the radio does not switch
that station, and a customer can hardly listen to any disturbances.
When EONTA LOCAL mode is selected, EONTA LO on numeric display is indicated for a few seconds.
2) EONTA DISTANCE mode:
EON TA switching is try to implemented by the information of current station. When EONTA DISTANCE
mode is selected, EONTA DX on numeric display is indicated for a few seconds.
8. PTY (PROGRAM TYPE) BUTTON
Press it shortly and repeatedly to select one of the following mode:
PTY MUSIC group- - PTY SPEECH group- - PTY OFF
While selecting PTY TYPE, its selection is implemented by preset buttons as described in preset key.
(press one of the 6 preset buttons shortly and repeatedly to select the PTY TYPE in the preset button)
When PTY MUSIC or PTY SPEECH is on, the previous PTY program and PTY word is displayed on
LCD. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop,
if desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY word
disappear.
9. POWER BUTTON
Press any button except the EJECT and OPEN button to turn on the unit.
It also can turn on the unit to insert disc, MMC/SD card or USB stick into their slot or socket.
Press the power button and hold for more than 0.5 seconds to turn off the unit.
10. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed short, AF switching mode is selected and the state of AF switching mode is displayed
by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The
interval of checking time of each AFs depends on the signal strength of current station, from a few
minute for strong station to a few seconds for weak station. Every time that new AF is stronger than
current station, it switches over to that frequency for very short time, and NEW FREQUENCY is
displayed for 1-2 second. Because the mute time of AF switching or checking time is very short, it is
almost inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and
save RDS program.
When pressed long, AF mode is converted to REGION ON/OFF mode.
REGIONAL MODE ON:
AF switching or PI SEEK is implemented to the station which have all PI codes are same as current
station.(PI CODE is checked when AF CHECK in progress)
REGIONAL MODE OFF:
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
(PI CODE and COVERAGE AREA is not checked when AF CHECK in progress)
11. MUTE BUTTON
Press the button to eliminate or resume the sound immediately.
To resume the sound immediately, can also press MODE, BAND, SEL button or rotate the
VOL knob.
12. PRESET STATION [ 1-6 ] AND TOP/>||, INT, RPT, RDM BUTTONS.
A) RADIO MODE
When pressed short, these keys select a preset station directly,
When pressed longer than one seconds, current station is stored in preset memory bank.
When PTY mode is selected, the preset memory buttons is shared as follows:
PTY music group ------------------PTY speech group --------------- OFF
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
B) In MMC/SD, USB or DISC mode, press TOP/>|| button to pause MMC/SD, USB or disc
playback, press it again to resume MMC/SD, USB or disc playback. Press it and hold for
more than about 0.5 seconds to play the first track of the MMC/SD, USB or disc.
C) In MMC/SD, USB mode, press INT button shortly to display M-INT and play the first 10
seconds part of each track of all.
In CD/MP3/WMA disc mode, press INT button shortly to display S-INT and play the first 10
seconds part of each track of all.
In MMC/SD, USB or MP3/WMA disc mode, press INT button long to display D-INT and play
the first 10 seconds part of each in current folder.
During INT mode, press INT button again to stop INT mode and retain playing the track
currently selected.
D) In MMC/SD, USB mode, press RPT button shortly to display M-RPT and play the current
track repeatedly.
In CD/MP3/WMA disc mode, press RPT button shortly to display S-RPT and play the current
track repeatedly.
In MMC/SD, USB or MP3/WMA disc mode, press RPT button long to display D-RPT and play
the current folder repeatedly.
During RPT mode, press RPT button again to cancel RPT mode.
E) In MMC/SD, USB mode, press RDM button shortly to display M-RDM and play the track
of all in random order.
In CD/MP3/WMA disc mode, press RDM button shortly to display S-RDM and play the track
of all in random order.
In MMC/SD, USB or MP3/WMA disc mode, press RDM button long to display D-RDM and play
the track in the current folder in random order.
During RDM mode, press RDM button again to cancel RDM mode.
F) In MMC/SD, USB or MP3/WMA disc mode, M6 and M5 is assigned as 10 TRACK up/down
when normal play.
13. MODE BUTTON
Press it to select RADIO, DISC, CARD(after inserting MMC/SD card), USB(after inserting
USB stick) and AUX mode.
14/15. MMC/SD SLOT and USB SOCKET and THEIR OPERATION
When needing to do MMC/SD or USB playing, insert the MMC/SD card or USB stick into
MMC/SD slot or USB socket. Then the playing mode will be changed into MMC/SD or USB
mode and display CARD or USB on LCD(When MMC/SD card and USB stick are both
inserted into their slot or socket, the playing mode will be changed into the mode of the latter
one), and then play the first track of MMC/SD or USB.