Akai A61024, Инструкция по эксплуатации, Страница: 8 / 12

8
USING YOUR APPLIANCE
8. To record on the tape’s reverse side,
press the STOP/EJ button twice and
open the door. Take out the tape and
insert it with the reversed side up,
close the door and press the record
button to resume.
9. You can erase a recording by
beginning a new recording on the
same tape.
10. To listen to your recording, use the
buttons to control playback.
TROUBLESHOOTING
CLEANING & MAINTENANCE
Problem Possible Cause
The tape player will not
turn on.
Make sure the device is plugged into the mains or that the
batteries are properly installed. Then turn on the device.
The tape player will not
record.
Make sure the device is powered on.
Check to see if a tape is inside the cassette player & that the
record button has been pressed.
If using an external MIC/device to record, make sure it has not
been disconnected.
The device will play even
though the PLAY button
has been pressed.
The device will automatically shut off when the tape comes
to an end. To continue reverse the tape or rewind it to begin
playback.
1. Always disconnect the equipment
from the power supply before
cleaning.
2. Clean the equipment with a soft,
damp, lint free cloth.
3. Do not use abrasives or harsh
cleaners.