Akai A61024, Инструкция по эксплуатации, Страница: 7 / 12

7
USING YOUR APPLIANCE
BEFORE FIRST USE:
• Remove your appliance from the
packaging.
• Dispose of the packaging in a
responsible manner.
• Locate your appliance in accordance
with the safety instructions.
• Plug the appliance into the mains
supply.
• Your appliance is now ready for
normal use.
POWER OPTIONS:
• Batteries: Insert 4 x DC 1.5V size
C batteries (not included) into the
battery compartment.
• Adaptor: Plug the adaptor into the
AC Power Jack on the back of the
Cassette Player, and then plug in at
the mains and switch on.
CONTROLLING PLAYBACK:
1. Press the STOP/EJ button twice to
open the cassette door.
2. Insert a tape into the player. Note:
Make sure the open part of the
tape is facing upwards, and that the
wound ribbon is on the left side of the
tape. Taking care to insert the tape
correctly.
3. Close the door and press the PLAY
button to play audio on the tape.
4. Use the Playback buttons in the figure
above to Rewind, Fast Forward, Stop
or Pause the cassette tape.
5. Use the Volume dial (on the left side
of the tape player) to control the
volume level.
6. Press the STOP button once to end
playback. Press the STOP/EJ button
again to eject the tape. The cover will
open and the tape can be removed or
reversed. Note: Make sure to close
the door once the tape is removed
or has been reversed to continue
playback.
7. When the tape finishes, the player
will stop and automatically turn off.
NOTE: The PLAY button will not function
after the tape player automatically shuts
off. To continue using the player, rewind
the tape or remove it and turn it over.
RECORDING AUDIO:
The tape player is equipped to record
audio onto a cassette tape using an
external or built-in microphone.
1. Insert a tape into the cassette player.
2. Use an external microphone/device
or the built-in microphone to record
audio. Note: If recording with an
external device/MIC, plug it into the
EXT. MIC jack.
3. Push the REC button to record.
4. You may now begin recording.
5. Note: It’s not necessary to use the
microphone close to the mouth to
record.
6. The tape player will automatically
shut off once the end of the tape is
reached.
7. Press the STOP/EJC button once to
stop the recording process at any
time.