Akai A58078, Инструкция по эксплуатации

Страница: 6 / 12

6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the product from the box.
2. Remove any packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the
parts and the contents against the
parts list.
4. Your appliance is now ready for
normal use.
CHARGING YOUR HEADPHONES
For best results, fully charge the unit
before use.
1. Connect one end of the included USB
cable into your computer or sound
device, and the other end into the
charging port of the earphones.
2. The red indicator light will turn on
when charging.
3. It takes approximately two to three
hours for the earphones to charge
fully.
4. The red indicator will go out once the
earphones are fully charged.
5. When the headphones are running
out of battery an alarm will sound.
The headphones with then turn off
automatically after 3-5 minutes.
Note:
Your earphones cannot be used
while charging.
POWERING ON/OFF & BLUETOOTH
1. Press the Play/Pause/Power On/Off
button for about 4 seconds, until the
red and blue indicator lights start
flashing alternately.
2. Turn on the Bluetooth function on
your smartphone.
3. Search for Bluetooth devices and
select ‘A58078’.
4. Enter the code ‘0000’ if needed.
5. If pairing is successful, the blue
indicator light will start flashing.
Note:
Your Bluetooth Headphones need to
be paired with your smartphone for your
first use. After this, the headphones will
connect to your smartphone automatically
when they are switched on.
If you have an incoming call, any music
you are listening to will pause, allowing
you to answer the call. Your music will
continue once the call is ended.
ANSWERING A CALL
IPHONE/SAMSUNG/HTC/SONY ETC.
Pick up via Headset
1. When a call comes in, quick press the
Mode/Phone button once to answer.
Press the Mode/Phone button again
to end the call.
Pick up via Phone
1. To answer the call through your
smartphone, simply press the answer
button when the call is incoming.
ENDING A CALL
1. You can end the call via your phone
or by quick pressing the Mode/Phone
button on your headset once more.
REJECTING A CALL
1. Hold the Mode/Phone button for 2
seconds and then release.