9
•
OK: Press to confirm a selection.
•
MENU: Press to return to the main
menu of a disc or DVD.
•
PAUSE: Press to pause playback.
•
VOL +: Press to increase the volume.
•
MUTE: Press to mute the sound.
•
VOL -: Press to decrease the volume.
•
SLOW: Press to play the disc in slow
motion, without sound. Press again to
turn off the slow motion.
•
RETURN: Press to return to the track
list menu during playback, on any disc
that is not a DVD.
•
PROG: Press to program playback
order.
•
DVD/USB: Press to toggle between DVD
and USB options.
•
RESET: Press to reset settings
•
PBC: Press to return to the main DVD
menu.
•
HD: Press to turn HD picture mode
on and off or to switch the output
resolution to 730P, 1080P etc.
INSTALLATION:
Select a stable, flat surface close to your TV
set to install the DVD player.
Do not install on top of a TV or monitor.
Do not block the vents by placing the DVD
player directly onto carpet, a bed, a sofa, or
by covering it with a cloth.
Do not place any objects on top of the DVD
player.
Do not move the DVD player during
playback.
Do not install the DVD player and speaker
system in any place that is:
•
Exposed to direct sunlight.
•
Extremely hot or cold.
•
Poorly ventilated or exposed to
humidity.
•
Exposed to dust.
•
Exposed to smoke, steam or heat (such
as a kitchen or bathroom).
USING YOUR APPLIANCE:
CONNECTING WITH AN AV CABLE:
The AV cable has three connectors on each
end – red and white RCA connectors that
go into the corresponding L RCA and R RCA
coloured sockets on the rear panel of the
DVD player, and a yellow AV connector that
goes into the video-in socket of the TV.
1. Connect one end of the AV cable to
the DVD player. Connect the red RCA
connector to the red (R) RCA output
socket, and the white RCA connector
to the white (L) RCA output socket.
Connect the yellow connector to the
yellow video output socket.
2. Connect the other end of the AV cable to
your television; ensuring you insert the
connectors correctly into the AV and
RCA input sockets.
3. Plug the DVD player in at the mains and
turn on using the Standby button.
4. Turn your TV on. If the TV does not
automatically show the DVD player
loading screen, use your television
remote to select the required input
channel.
5. Use the eject button to open the loading
tray in the DVD player and insert a DVD.
Close the loading tray.