Akai 29CT24FS, Руководство по обслуживанию

Страница: 51 / 56

20 20
11
66
22
33
55
44
88
77
99
10 10
13 13
11 11
12 12
14 14
15 15
16 16
17 17
18 18
19 19
21 21
22 22
11
22
33
11 11
77
13 13
55
44
(X4) (X4)
10 10
(X4) (X4)
(X2) (X2)
(X6) (X6)
12 12
66
11 11
14 14
11 11
15 15
To the joint of the power switch To the joint of the power switch
16 16
Code No. Code No.
No. No.
Serial Serial
Remarks Remarks Parts Parts Qty Qty
AA
A View A View
CRT assembly CRT assembly 11
Tapping screw 4X16BTHCh Tapping screw 4X16BTHCh
Wire clip B Wire clip B
Front Cover Assembly Front Cover Assembly
Chassis assembly Chassis assembly
CRT RGB PCB assembly CRT RGB PCB assembly
Back cover Back cover
Rubber washer DP-1 Rubber washer DP-1
Rear plate Rear plate
11
11
11
11
11
11
44
Tapping screw 4X20BAHCh Tapping screw 4X20BAHCh
White nitro magnetic paint Q04-3 White nitro magnetic paint Q04-3
Soldering agent H-01 Soldering agent H-01
Specific tapping screw M6X35W Specific tapping screw M6X35W
Tin solder HLSn60PbA Tin solder HLSn60PbA
Plasticine Plasticine
Seal cap
Seal cap
44
66
44
11
0.5g 0.5g
11
Distance clip Distance clip
Wire clip XJ-100 Wire clip XJ-100
11
5. Tie the degaussing coil with the wire clip XJ-100(9) to make the wire far 5. Tie the degaussing coil with the wire clip XJ-100(9) to make the wire far
4. Insert the wire clip B(16) into the slot on the rear terminal board. 4. Insert the wire clip B(16) into the slot on the rear terminal board.
After inspection and ensuring O.K, Reinstall the back cover. After inspection and ensuring O.K, Reinstall the back cover.
3. Connect wires according to the final wiring diagram and check if the 3. Connect wires according to the final wiring diagram and check if the
2. Check and make sure that all control buttons can work flexibly and normally. 2. Check and make sure that all control buttons can work flexibly and normally.
1. Install the CRT with fixing torque of 3.5--5 N.m. 1. Install the CRT with fixing torque of 3.5--5 N.m.
wired connectors are connected correctly and fixedly, and the high wired connectors are connected correctly and fixedly, and the high
high voltage cap and CRT RGB PCB are mounted. After adjustment of
high voltage cap and CRT RGB PCB are mounted. After adjustment of
the two FCBs, lock them with white nitro magnetic paint Q04-3 on the shafts.
the two FCBs, lock them with white nitro magnetic paint Q04-3 on the shafts.
from high temperature components. from high temperature components.
560m m
FINAL ASSEMBLY DIAGRAM FOR 29CT24FS, 29CT71FS