Load level
Indication
No power on the Socket (type F)
Don’t have any indication
Socket (type F) turned off
Blue
Socket (type F) turned on, no load
Green
~550 W
Yellow
~1250 W
Orange
~2000 W
Red
~2500 W
Dark red
~3000 W
Purple
One or more types of protection triggered
Smoothly lights up and goes out red
Hardware failure
Quick red ashes
The exact power can be seen in the
Functionality Testing
Socket (type F) functionality tests do not begin immediately, but not later than
over a single hub – smart plug polling period (36 seconds with the Jeweller
standard settings). You can change the ping period of devices in the
Jeweller
menu of the hub settings.
To run a test, in the Ajax app:
Selection of the installation site
When choosing where to install Socket (type F), take into account the Jeweller
signal strength and the distance between the device and the hub or the
1.
Select a hub if you have several or use a PRO app.
2.
Go to the
Devices
tab.
3.
Select
Socket (type F)
in the list.
4.
Go to
Settings
.
5.
Select and run the
Jeweller Signal Strength Test
.
