AJAX MotionProtect, Руководство пользователя

Страница: 7 / 16

For MotionProtect Plus:
Always active If active, the detector always registers motion
Alert with a siren if motion detected
If active, and are
activated when the motion detected
Jeweller Signal Strength Test
Switches the detector to the signal strength test
mode
Detection Zone Test Switches the detector to the detection area test
Attenuation test
Switches the detector to the signal attenuation
test mode (available in detectors with rmware
version 3.50 and later)
Temporary Deactivation
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
User Guide Opens the User Guide
High — for premises with a minimum amount of
obstacles, motion is detected as quickly as
possible
Medium — for premises with potential
obstacles (windows, air conditioner, heating
element, etc)
Low — ignore pets weighing up to 20 kg and up
to 50 cm tall
High — the detector disregards cats (under 25
cm)
Medium — disregards small dogs (under 35 cm)
Low — disregards animals under 50 cm.
HomeSiren StreetSiren
Deactivate entirely — the device will not
execute system commands or participate in
automation scenarios, and the system will
ignore device alarms and other noti cations
Deactivate lid noti cations — the system will
ignore only noti cations about the triggering of
the device tamper button
Learn more about temporary
deactivation of devices