Malfunctions
When a malfunction is detected (for example, there is no connection via
Jeweller), the Ajax app displays a malfunction counter on the device icon. All
malfunctions are shown in the detector states. Fields with malfunctions will be
highlighted in red.
A malfunction is displayed if:
Icons
The icons display some of the MotionProtect states. You can view them in the
Ajax app in the
Devices
tab. To access them:
Icon
Meaning
Jeweller signal strength. Displays the signal strength between the detector and
hub or range extender. The recommended value is 2 or 3 bars.
The detector battery charge level.
The detector is operating via a
.
The detector operates in the
Always active
mode.
The detector temperature is out of acceptable limits: below –10°C and
above +40°C.
The detector enclosure is open (tamper is triggered).
No connection with the hub or radio signal range extender via Jeweller.
The detector battery is low.
1.
Sign in to the
2.
Select the hub if you have several of them or using a PRO app.
3.
Go to the
Devices
tab.