Always Active
When this option is enabled, the detector is
always in the armed mode and detects motion.
Alert with a siren if motion detected
If active,
added to the system
are
activated when the motion is detected.
Jeweller Signal Strength Test
Switches the detector to the Jeweller signal
strength test mode.
The test allows you to check the signal strength
between the hub or the range extender and the
detector via the Jeweller wireless data transfer
protocol to determine the optimal installation
location.
The recommended value is 2–3 bars.
Detection Zone Test
Switches the detector to the detection zone test
mode.
The test enables users to check how the
detector responds to movement and determine
the optimal installation location.
Attenuation Test
Switches the detector to the signal attenuation
test mode. The test is available for detectors
with
rmware version 3.50 and higher
.
During the test, the transmitter power is
decreased or increased to simulate a change in
the environment to test the stability of
communication between the detector and the
hub or range extender.
Temporary Deactivation
Allows the user to disconnect the device
without removing it from the system.