AJAX GlassProtect Fibra Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 29

AJAX GlassProtect Fibra Скачать руководство пользователя страница 21

GlassProtect Fibra:

Always Active

If active, the detector is always in the armed
mode and noti es of alarms.

Temporary deactivation

Shows the status of the device temporary
deactivation function:

Firmware

Detector rmware version.

ID

Detector ID. Also available on the detector body
and the packaging.

Device №

Device number. This number is transmitted to
the CMS in case of an alarm or event.

Bus №

The number of the hub bus the device is

Disconnected

— external contact is

disconnected (option disabled in the app).

Open

— external contact is connected and is

open.

Closed

— external contact is connected and

is closed.

No

— the device operates normally and

transmits all events.

Lid only

— the hub administrator has

disabled noti cations about tamper
triggering.

Entirely

— the hub administrator has entirely

excluded the detector from the system. The
device does not follow system commands
and does not report alarms or other events.

By the number of alarms

— the device is

automatically disabled by the system when
the number of alarms is exceeded. The
feature is con gured in the Ajax PRO apps.

By timer

— the device is automatically

disabled by the system when the recovery
timer expires. The feature is con gured in
the Ajax PRO apps.

«
...
19
20
21
22
23
...
»

Содержание GlassProtect Fibra






























Отзывы:

Нет отзывов