4
Technical Data Sheet: FireProtect 2 Jeweller
Jeweller
communication technology
Jeweller is a radio protocol for fast and reliable two-way communication between hubs and connected
devices. The protocol provides a wireless radio communication range with FireProtect 2 up to 1700 meters.
This communication range allows you to install detectors even on large-scale objects.
Jeweller is responsible for transmitting alarms and events. The radio protocol also provides an interconnected
fire detectors alarm activation within 20 seconds in a system with any number of FireProtect 2. Thanks to
Jeweller, users and the monitoring station can always see the current status of detectors in Ajax apps.
Autonomous operation
Two models of FireProtect 2 (Heat / Smoke) are
available — with replaceable and non-replaceable
batteries. Detectors with replaceable batteries operate
for up to 7 years with pre-installed CR123A batteries.
After their discharge, the batteries can be replaced with
new ones. The model with non-replaceable batteries
works from built-in lithium batteries for at least 10
years. After the batteries are discharged, such a
detector should be substituted with a new one.
Quick pairing and installation
To install FireProtect 2, it is not necessary to
disassemble the detector enclosure.
Replaceable or non-replaceable batteries are
pre-installed, and the SmartBracket mount is
removed from the detector without tools.
SmartBracket mounting panel has a degree of
freedom of 90°. This allows the installer to align
the position of the device after installation.
The detector connects to the Ajax security system in less than a minute. An installer needs to open the Ajax
app, scan the QR code, and add the device to the room and security group.
