RovoRx UltraHD HDBaseT Receiver v1.0r1 9
www.aja.com
Chapter 2 – RovoRx-HDMI Receiver
RovoRx-HDMI Overview
RovoRX-HDMI converts uncompressed HDMI Video/Audio signals up to UltraHD
for reception via HDBaseT over CAT type twisted pair cable. It can also send
and receive RS-232 control signals over the same cable. Video and audio can be
received by this device over distances up to 328 feet/ 100 meters on Cat 6a cable.
See
"Appendix A Specifications" on page 27
for a complete list of supported
formats, frame rates, and CAT cable requirements.
The simple and economical RovoRx-HDMI is designed to pair with the AJA
RovoCam camera, to provide video, audio, control and power transmission using
a single CAT cable. RovoRx-HDMI can also be used with any compatible HDBaseT
transmitter, including AJA’s HB-T-HDMI and HB-T-SDI Mini-Converters.
RovoRx-HDMI Features
RovoRx-HDMI
• 1x HDMI (UltraHD capable) output
• Extend uncompressed UltraHD or HD HDMI signal up to 100m over CAT cable
• RS-232 control on the same RJ-45 cable
• Two channel unbalanced analog audio outputs, when used with RovoCam
and optional stereo microphone
• 48VDC power supply (included)
• Optional RS232 Cable Kit (HB-CABLE-KIT)
• 5-year warranty
RovoRx-HDMI Block Diagram
USB Port
RJ-45
HDBaseT In
RS-232 Out
Power Out
+48 VDC
HDMI Output
RS-232 In
Left Audio Out
Unbalanced RCA
Right Audio Out
Unbalanced RCA
RS-232
Receiver
Power
Distribution
HDBaseT
Receiver
+10dB
(Future Use)
