![AJA RovoRx-HDMI Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/aja/rovorx-hdmi/rovorx-hdmi_installation-and-operation-manual_2883370010.webp)
RovoRx UltraHD HDBaseT Receiver v1.0r1 10 www.aja.com
RovoRx-HDMI I/O Connections
LINK LED
HDMI Output
Connector
3.5mm TRS
RS-232 Port
HDBaseT
Input
Connector
DC Power
Input
Right Analog
Audio RCA Output
Left Analog Audio
RCA Output
LOCK LED
Power LED
(Future Use)
NOTE: The LINK LED, when green, indicates an active HDBaseT connection.
NOTE: The LOCK LED, when blinking green, indicates a lock to a valid video source.
System Installation
RovoRx-HDMI Installation with RovoCam
Typically, installation consists of the following steps:
1. Ensure the RovoRx-HDMI converter is disconnected from power.
2. Connect the RovoCam HDBaseT RJ-45 output to the HDBaseT RJ-45 input
connector with an approved CAT cable type and length.
3. Connect the RovoRx-HDMI output to the HDMI input of a destination device
(in this example, an HDMI monitor) with an HDMI cable.
4. Connect the 48 VDC power connector to the RovoRx-HDMI, and then
connect the provided DC power supply to an AC power source with the
supplied cable.
NOTE: The RovoCam camera ships configured for 1080p59.94.
5. Power up the HDMI monitor. You should see the camera image on the
monitor. This confirms the camera and links are working.
6. Connect a control source to the RS-232 input connector, using a 3.5mm TRS
cable.
7. Install and configure RovoControl (or a third-party control application) for
operation with the RovoCam system.