OG-ROI Series openGear card v1.6 13 www.aja.com
Figure 8. The white plastic tab for the card second from the right is now
upright. All cards are shown fully inserted.
5. Close the frame door as follows:
A. Slide the door into the frame.
B. Pull and release the door tabs to ensure the frame door is securely locked
to the frame.
Cabling
Refer to
to identify the input and output signal
connectors.
Two WECO audio mating connectors are included with each OG-ROI Series card.
1. Insert connecting audio wires into their corresponding holes from the rear
).
Figure 9. Rear view of the WECO mating audio connector
2. Tighten the screws on the other side of the audio mating connector (
Figure
8
).
Figure 10. Front view of the WECO mating audio connector showing the
tightening screws
