
OG-ROI Series openGear card v1.6 8
www.aja.com
To connect a DVI video input to the OG-ROI-HDMI input connector, use a passive
DVI-to-HDMI adapter (user-supplied). You can also use a cable adapter that has a
DVI connector on one end of the cable and an HDMI connector on the other.
HDMI Output
This is a pass-through output for use on a second computer monitor. Connections
are the same as described for DVI/HDMI input above.
OG-ROI-DVI
Figure 3. I/O Connections for the OG-ROI-DVI Converter/Scaler
SDI Output
BNC (J1)
DVI Input
Reference
Input
BNC (J2)
DVI Output
Analog Audio
Input L
Analog Audio
Input R
DVI Input
Connects to your Computer or single-link source device.
To connect an HDMI video input to the ROI DVI input connector, use a passive
HDMI-to-DVI adapter (user-supplied). You can also use a cable adapter that has an
HDMI connector on one end of the cable and a DVI connector on the other.
DVI Output
This is a pass-through output for use on a second computer monitor. Connections
are the same as described for DVI/HDMI input above.
Analog Audio
Two 3-pin analog audio connectors accept two channels of analog audio which
can be embedded into the SDI output as determined by the audio configuration
set using DashBoard.
SDI Video Output
The SDI output BNC delivers the processed output signal which has scaling,
region of interest, converted raster, converted frame rate, and embedded audio.
Reference Video Input
The Reference BNC accepts an Output timing reference signal. The reference can
be SD Blackburst or HD tri-level sync.