AJA OG-FiDO-12G Series, Инструкция по установке и эксплуатации

Страница: 16 / 44

OG-FiDO-12G-Series openGear Card v3.2.1 16 www.aja.com
NOTE: The SFP module must match the card’s capabilities for proper operation. Input
and output triangles next to the fiber ports identify which are inputs and which
are outputs ( Figure 11 ).
Figure 11. SFP Modules
10. Close the frame door as follows:
A. Slide the door into the frame.
B. Pull and release the door tabs to ensure the frame door is securely locked
to the frame.
Cabling
Refer to Figure 1 on page 6 and Figure 2 on page 6 to identify the input and
output signal connectors.
NOTE: Keep the protective dust cap in the SFP module until the fiber cabling is actually
connected to the module.