OG-DANTE-12GAM openGear Card v1.1.0 19 www.aja.com
SDI 1 Control Tab Screen
Figure 15. OG-DANTE-12GAM SDI 1 Control Tab Screen in DashBoard
Click on the SDI 1 Control tab to view and make changes to the audio embedding
and disembedding settings.
HANC Data -
When
Pass
is selected, all incoming HANC packets are passed unless
the embedder settings require all or part of them to be over-written.
When
Delete
is selected, all incoming HANC packets are dropped before
embedding any new audio packets. The embedder settings determine all
embedded audio output. Disembedding is not affected.
NOTE: 2048x1080p/psf 29.97 and 30 formats support a maximum of 8 channels of
embedded audio. When one of these formats is present and embedding is turned
on, the PASS HANC setting will be ignored and all incoming packets will be
dropped before embedding any new audio packets.
Audio Channel Pair Pass/Embed -
Choose which SDI audio channels will embed
incoming Dante audio channels. When
Pass
is selected, the corresponding
incoming and outgoing audio channel pair for SDI 1 remain unchanged.
When
Embed
is selected, the selected channel pair will embed the
corresponding incoming Dante channel pair into the outgoing SDI 1 signal.
NOTE: If a channel is not set up to embed in DashBoard, you can still make the route in
Dante Controller but the audio will not be embedded.