AJA KONA 4 Скачать руководство пользователя | Manualshive

Страница: 23 / 89

background image

KONA Capture, Display, Convert v15.2 23 www.aja.com

https://www.aja.com/en/support/downloads/

System software updates may occasionally become available to AJA KONA

owners on our website. We recommend checking occasionally for both software

updates and additional product information.

NOTE: If your computer has previously had another video capture or multimedia device

installed, ensure you uninstall any related software before installing KONA This

will prevent any hardware or software conflicts.

Software Package Installation and Re-installation

Before installing the KONA software package, ensure that your capture/editing

application is installed as detailed in its user documentation. You cannot use

KONA with a third-party application until the application has been installed and

run at least once on your workstation. Next, install the AJA software package.
If you add KONA supported applications at a later date and have not previously

installed the appropriate drivers, you must run the install program again selecting

the appropriate application support software to be installed.

Firmware Update Procedure

After the AJA Software Package has been installed on a computer with your AJA

hardware installed, the firmware on that AJA device can be updated if a newer

version of firmware is included with that software package.
1. Open the AJA Control Panel application.
2. If more than one AJA device is connected, choose the device you want to

update by selecting its name from the drop-down menu at the top of the

screen.

3. Go to the Control Panel Firmware Screen.
4. Select the firmware version (if multiple versions exist) in the

Desired

dropdown.

5. Click on

Install

. Messages appear and when finished, firmware update

completed messages are shown (

).

«
...
21
22
23
24
25
...
»

Содержание KONA 4


























































































Отзывы:

Нет отзывов

Похожие инструкции для KONA 4

Бренд: 3Com Страницы: 20

Бренд: C4i Страницы: 8

IntelliJack NJ200

Бренд: 3Com Страницы: 4

Бренд: IEI Technology Страницы: 21

Magic WiFi mini Ek

Бренд: Devolo Страницы: 22

Surround Dongle

Бренд: Sennheiser Страницы: 18

PCI-6110E/6111E

Бренд: National Instruments Страницы: 113

Бренд: Moxa Technologies Страницы: 36

Бренд: ASROCK Страницы: 173

Бренд: Rosewill Страницы: 2

Бренд: RR-Concepts Страницы: 12

Бренд: Omron Страницы: 14

METERS AND MORE UM2241

Бренд: ST Страницы: 26

Sporlan Division SCS-PB Series

Бренд: Parker Страницы: 10

VXC-114U Series

Бренд: ICP DAS USA Страницы: 8

Бренд: ICP DAS USA Страницы: 8

iConverter GX/F

Бренд: Omnitron Systems Technology Страницы: 2

PCIe Gen1 Framegrabbers

Бренд: EDT Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды