AJA KONA 3, Инструкция по установке и эксплуатации, Страница: 56 / 82

50
inputs: XLR or BNC connectors. The Audio Input pulldown allows you to select which of
the two connector groups will be used. If you digitize footage and find that there is no
audio present on the captured footage, it may simply be because the audio selection in
the Kona Control Panel is set to AES/EBU (BNC) when in fact you are connected via AES/
EBU (XLR).
Audio Input Select Choices
SDI Output Screen
The SDI Output screen shows the current settings for both of the SDI outputs. Because the
outputs can be configured independently, one output may be the Primary format and the
other output may be the Secondary format. If an input/output has no video, it will be
indicated on the block diagram (“No Video”).
KONA 3 Control Panel, SDI Output Screen
SDI Output Screen Settings
Separate information panes will be listed (as applicable) for SDI Outputs 1 and 2. Information
that can appear includes the following items. You can view the current setting or us the
pulldown menu to change to it:
Primary —when selected, this indicates that the SDI output is set to the same format as the
framebuffer. That value will be listed in blue.