manualshive.com logo in svg

AJA KiPRO quad, Руководство по установке и эксплуатации

Поделиться
Скачать
AJA KiPRO quad Скачать руководство пользователя страница 54

www.aja.com

54

 

Ki Pro Quad   v5.2r3

50.6 MAC ADDRESS 

This parameter is an information only field showing the MAC address of the Ki Pro Quad’s 
Ethernet adapter. 

50.9 User 

Authentication

This parameter enables or disables an authentication login requirement when using the 
web UI. By default this parameter is set to Disabled.

If you select Login via the front panel interface and then attempt to use the web UI 
interface, you will be asked for a login password. The web browser will present the login 
screen requesting that a password be entered before you can access any other parameter 
or configuration screen.

The password is initially set to the default value: password.

If you select Login for the User Authentication parameter via the web UI, you may enter a 
user selected password. As long as the menu parameter is not changed to Disabled, the 
password requirement will remain in effect. Any time the web UI is accessed, the login 
password will be requested before additional access to any other web UI parameter or 
configuration screen will be granted. If you enter a user selected password, be aware that 
this password will be retained and you will need to remember the password. If the user 
entered password is forgotten, you may clear it by performing a Hard Factory Reset.

NOTE:  

A standard Factory Reset does not clear the user entered password. To perform a Hard Factory 
Reset, enter the 99.0 Factory Reset parameter, and unlike a typical Factory Reset where only 
the ADJUST (up) button is held for 2 seconds, hold both the ADJUST (up) and the ADJUST 
(down) buttons simultaneously for 2 seconds.

55.4 DATE SET

This parameter manually sets the calendar date of the internal Ki Pro Quad clock. The 
value is defined as YYYY/MM/DD (year/month/day). 

Information only display

Selecting this parameter allows you to view Ki Pro Quad’s 

ethernet MAC address. The MAC address is a unique value 
associated with the internal ethernet network adapter. MAC 
addresses are also known as hardware addresses or physical 
addresses. MAC addresses uniquely identify an ethernet 
adapter on a LAN. 

MAC address format: MM:MM:MM:SS:SS:SS. The value is 12-

digit hexadecimal, where the first half identifies the 
manufacturer and the second half identifies the unique 
serial number. 

variable

Using the adjust buttons, enter a calendar date for Ki Pro 

Quad. Using the adjust buttons and the top SELECT button, 
select the characters for each category (YYYY/MM/DD). The 
adjust buttons scroll through the choices and the top 
SELECT button advances to the next character. While 
selecting characters, the character being changed will flash 
to show its position. When finished, the final press of the 
SELECT up button will flash the whole value, hit SELECT 
once more to confirm and the next menu parameter will 
appear.

Содержание KiPRO quad




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды