Ki Pro Ultra Plus File Based Recorder/Player v1.0r3 56 www.aja.com
Figure 16. Static Gateway Screen with Keypad
variable
Using the Adjust buttons, enter a gateway compatible with
your LAN (if you have one). This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP, the default gateway will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default gateway is:
10.0.0.1.
NOTE: Without a properly configured default gateway (whether you have a router/
gateway or not), Ki Pro Ultra Plus will be unable to see other Ki Pros on the
network, although you may still be able to control the Ki Pro Ultra Plus via a web
browser. Also, without a proper gateway defined, the discovery feature “Available
Ki Pros—Click to Refresh” on the Network web page will not work correctly and
list other Ki Pros or FS1s on the network.
50.5 System Name
This parameter defines a name for Ki Pro Ultra Plus and gives it a unique identifier.
This same name is used both when displaying systems via the web interface.
variable
Using the User Control Knob, enter a name for Ki Pro Ultra Plus.
Using the User Control Knob, select the characters for each
of the up to 20-character name. The character set allowed
is: 0 through 9, ‘-’,’.’, A through Z (uppercase) and a through z
(lowercase).
Default: Ki Pro Ultra Plus
50.6 MAC Address
This parameter is an read-only field showing the MAC address of the
Ki Pro Ultra Plus’s Ethernet adapter.
Information only display
Selecting this parameter allows you to view Ki Pro Ultra Plus’s
Ethernet MAC address. The MAC address is a unique value
associated with the internal Ethernet network adapter. MAC
addresses are also known as hardware addresses or physical
addresses. MAC addresses uniquely identify an Ethernet
adapter on a LAN.
MAC address format: MM:MM:MM:SS:SS:SS. The value is 12-digit
hexadecimal, where the first half identifies the manufacturer
and the second half identifies the unique serial number.
