IP Mini-Converters JPEG 2000 IP Video/Audio Converters v1.0 27 www.aja.com
Source Port -
(Optional) The UDP source port of stream.
• Value Range: 0 - 65535
• Default Value: 0
• A value of zero implies the source port number of packets is to be ignored.
Figure 13. IPR-1G-SDI Config Screen 2 of 2
NOTE: The following is a list of acronyms used in this section of the Config Screen:
• Transport Stream (TS)
• Program Association Table (PAT)
• Program Map Table (PMT)
• Program Clock Reference (PCR)
• Packet Identifier Code (PID)
Available Programs -
TS Programs available on the incoming stream.
Program Selection -
Determines how the program to receive is selected.
• Auto - First Program in PAT
• Auto - Lowest Program Num
• Select Program Num
• Select Program PID
• Default: Auto - First Program in PAT
Available Audio PIDs -
Reports the Audio PIDs that are available in the selected
program.
Audio Essence Number -
Select the audio number from the program.
• Value Range: 1 to 4
• Default Value: 1
Active Program Number -
Reports the program number of the selected
program. Shows "-1" when no program is active.
When Program Selection is set to “Select Program Num,” the field Program
Number displays with a slider control. Use the slider control to select the
Program Number.
When Program Selection is set to “Auto - First Program in PAT” or “Auto -
Lowest Program Num,” Active Program Num displays the auto-selected
Program Number and cannot be edited.
Program PID -
Reports the PID of the selected program.
