Hi5-12G Mini-Converter v1.4 7
www.aja.com
Figure 3. Hi5-12G to Fiber LC Single Channel SFP Example
NOTE: Fiber optic interconnections can be severely compromised by dirt, oils, or other
contaminants. All dust caps should be replaced on cables and equipment
whenever
Hi5-12G
converters are disconnected from fiber optic cables.
4. Apply +5VDC power to the converter (AJA power supply included).
5. The Hi5-12G will now run using the default factory settings. If you wish to
alter the factory settings, you’ll need to:
• Install the AJA Mini-Config software on your computer
• Attach the Hi5-12G via USB
• Make your changes using AJA Mini-Config setup screens.
This process is detailed in
"USB Control and Setup—Using AJA Mini-Config" on page
.
NOTE: For highest reliability, the mini converter relies on convection cooling instead
of using a built-in fan. Therefore, when installing the unit, mount in a location
where it has access to air for proper cooling. Do not stack the Hi5-12G with other
mini converters.
