Hi5-12G Mini-Converter v1.4 6
www.aja.com
I/O Connections
Figure 2. Hi5-12G Converter Connections
HDMI
Output
Connector
USB
Port
DC Power
Input
SDI Input
SFP Cage
Analog
Audio
Outputs
Power LED
Lock LED
SDI Loop
Output
NOTE: The LED adjacent to the SDI connector indicates by color the detected SDI input
signal. Off is no signal, green is SD-SDI, red is HD-SDI, amber is 3G-SDI, magenta is
6G-SDI, and blue is 12G-SDI.
Installation
NOTE: AJA does not support third-party SFP modules. Use of a non-AJA SFP module will
void the warranty.
Hi5-12G-R ships with a 12G-SDI Fiber LC single channel SFP receiver.
Hi5-12G-R-ST ships with a 12G-SDI Fiber ST single channel SFP receiver.
Hi5-12G-TR ships with a 12G-SDI Fiber LC SFP transceiver.
Installation consists of the following steps:
1. Ensure the Hi5-12G is disconnected from power.
2. Connect video equipment to the converter BNCs.
3. If applicable, connect fiber to the 12G-SDI Fiber LC or ST single channel SFP
receiver or transceiver.
CLASS 1
LASER
PRODUCT
Warning! Active fiber-optic cables emit radiation invisible to the human eye. Do
not look directly at the end of an active fiber-optic cable or the fiber connector
on a
Hi5-12G-R, Hi5-12G-R-ST or Hi5-12G-TR
; these models are Class 1 Laser
Products.
