AJA HDP2, Руководство по установке и эксплуатации, Страница: 15 / 31

HDP2 Mini-Converter v1.4r1 www.aja.com 15
Scaling: Choose Auto to let the HDP2 choose based on the attached output device’s capabilities,
1:1 for no scaling, or Scale, to let the HDP2 scale for the attached monitor. Displaying 1:1
only works properly when it is possible to display the entire unscaled raster. For example,
it is not possible to display a 1920 x 1080 input on a 1600 x 1200 monitor. For optimal
performance with 1:1 scaling, use a 1920 x 1200 (WUXGA) monitor.
SD Format: Choose Normal (standard picture aspect ratio) or Anamorphic; these control how an SD
picture appears on an HD monitor.
Standard: Raster choices available are: Auto (let the HDP2 decide based on input), Native, WUXGA,
1080p, 1080i, 720p, 576p, or 480p.
Frame Rate: Choices are: Auto (let HDP2 decide), VESA, 24/23.98, 25, 30/29.97, 48/47.95, 50, or 60/
59.94.
HDMI/DVI: Choose Auto, HDMI, or DVI. Choosing “Auto” lets the HDP2 automatically select the
output mode based on the input video and the attached device's capabilities.
Audio Tab Screen
The selections on this screen configure the output audio.
HDMI Channel: Choose Auto, 2-channel or 8-channel embedded audio. Choosing “Auto” lets the HDP2
automatically select the audio channels based on the attached device's capabilities.
NOTE: When in 2-channel mode, the audio pair selected will be the same as described by the
“Analog Audio” selection, below.
Analog Channel: Choose which 2 embedded audio channels are routed to the RCA output pair: Ch 1+2, Ch
3+4, Ch 5+6, or Ch 7+8.